Résumé
Water scrubbing is the most widely used technology for removing CO2 from biogas and landfill gas. This work developed a rate-based mass transfer model of the CO2–water system for upgrading biogas in a packed bed absorption column. The simulated results showed good agreement with both a pilot-scale plant operating at 10 bar, and a large-scale biogas upgrading plant operating at atmospheric pressure. The calculated energy requirement for the absorption column to upgrade biogas to 98% CH4 (0.23 kWh Nm–3, or 4.2% of the input biogas) is a significantly closer approximation to the measured value (0.26 kWh Nm–3, or 4.8% of the input biogas) than has previously been reported in the literature. The model allows for improved design of CO2 capture and biogas upgrading operations and can also be a useful tool for more detailed cost–benefit analysis of the technology.
| langue originale | English |
|---|---|
| Pages (de - à) | 12783-12792 |
| Nombre de pages | 10 |
| journal | Industrial Engineering Chemistry Research |
| Volume | 53 |
| Numéro de publication | 32 |
| Les DOIs | |
| état | Published - 10 juil. 2014 |
SDG des Nations Unies
Ce résultat contribue à ou aux Objectifs de développement durable suivants
-
Affordable and clean energy
-
Responsible consumption and production
-
Climate action
Empreinte digitale
Examiner les sujets de recherche de « Modeling the water scrubbing process and energy requirements for CO2 capture to upgrade biogas to biomethane ». Ensemble, ils forment une empreinte digitale unique.Contient cette citation
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver